VZ 58 PISTOL 762B CZECH POINT W/ BRACE. The Sa vz.58 pistols in 7.62×39 are manufactured by Czech Small Arms in Jablunka, Czech Republic features.
- high-quality barrel manufactured by Lothar Walther in Germany
- chrome-lined barrel bore
- Shockwave Blade pistol stabilizer
- Phantom flash hider
- patented push-down plate on bolt carrier to prevent misfire issues (Czech Small Arms vz. 58 firearms are the only vz. 58s manufactured with this vital part to ensure reliability)
- drilled and tapped side rail holes in the receiver for do-it-yourself side rail installation for optic mounts (side rail and optic mount not included with pistol)
- semi-gloss/matte black finish cured at 300 °F over phosphate.
- two 30 round magazines. Style may vary.)
- owner’s manual
- cleaning kit
- 5-year warranty.
Important Notes on the VZ 58 PISTOL 762B CZECH POINT W/ BRACE:
VZ 58 PISTOL 762B CZECH POINT W/ BRACE. The bayonet lug is not attached to the front sight base. Reason: it is not possible to fix a bayonet to the vz.58 pistols as the proximity of the bayonet lug to the gas adapter/block does not permit attachment. In addition, all vz. 58 Compact 762 pistols possess the front sight base with an enclosed circle and the narrow-width trigger guard (as shown in the photos). In addition, front and rear sling swivels are identical to what is shown in the photos too. Front Sight may vary from picture and be either a closed or open sight. (Sorry no choice or special request at this time)
Gas Piston Notes:
The Compact pistol gas piston cannot be removed without a tool. To remove the gas piston, once the upper handguard jacket has been removed, use a cleaning rod section from the cleaning kit and insert the cleaning rod into the receiver (beneath the rear sight). Push the gas piston to the rear with the cleaning rod to compress the gas piston spring and then push down on the rear of the piston that is protruding from the gas piston hole in the receiver. This action will angle the gas piston upwards, away from the gas adapter/block, and the piston can now be removed using the index finger and thumb.
It has been confirmed while shooting the vz. 58 Compact 762 that the Wolf brand ammunition manufactured in Ukraine is not loaded as hot as Wolf brand ammunition manufactured in Russia. The Ukrainian ammunition continued to cycle the pistol reliably, but casings were ejecting approximately half the distance of the Russian ammunition. It was also noticed that Golden Tiger ammunition (manufactured in Russia) did not eject as far as Russian manufactured Wolf ammunition. Golden Tiger was reliable too, and casings ejected farther than Ukrainian ammunition, but Golden Tiger casings did not eject as far as the Russian manufactured Wolf brand. From our experience of shooting the vz. 58 Compact pistol, we recommend the Wolf brand ammunition manufactured in Russia.
Shockwave Blade pistol stabilizer Notes:
The Blade stabilizer is made from high-strength glass-reinforced polymer and is attached to the pistol using the Czech Small Arms adapter. The Blade incorporates a vertical “fin,” which you stabilize against the inside of your forearm when in the firing position. Or, you can stabilize the Blade against your cheek for a perfect, steady sight picture. The Blade is secured to the tube using the set screw. Each vz. 58 Compact pistol will include a copy of an ATF approval letter detailing the Shockwave Blade pistol stabilizer. VZ 58 PISTOL 762B CZECH POINT W/ BRACE.
The pistol includes the glass-filled nylon US-made trigger. If the Czech steel trigger is preferred, please scroll down to the bottom of the page to purchase the steel trigger and it will be installed before your pistol ships. Section 922(r) does not apply to the vz. 58 Compact model as it is a pistol and not a rifle. The color of the finish is a semi-gloss/matte black coating (cured at 300°F). The new production pistol barrel is made from a high alloy Chrome Molybdenum steel (4340) and IS chrome-lined. The flash hider is removable and the tread pattern is 14×1 right hand (standard vz.58 thread pattern).
SBR Warning: a stock can only be legally attached to this pistol after Form 1 has been approved by BATFE. Attaching a stock to the vz.58 pistols, without an approved Form 1, is a federal felony and conviction could result in 10 years imprisonment and a $250,000 fine.
Drilled and tapped holes for the receiver side rail ARE included in the purchase price of the pistol. In other words, you can easily install our optional side rail by removing the two screws in the receiver and screwing on the side rail with a hex/Allen wrench. GUNSMITHING IS NOT REQUIRED TO ATTACH THE SIDE RAIL TO OUR VZ.58 PISTOL. Do not forget to use high strength thread-locker on the screws while attaching the side rail. Buy Sa Vz 58 Pistol 762b 12 – Czech point